OEM supply from Shandong, China
YTD supplies cooler glass door assemblies for upright commercial refrigerators, beverage display cabinets, convenience-store coolers, and OEM refrigeration programs. Each project is matched by opening size, temperature, glass construction, frame, hinge, handle, gasket, and packing requirement before quotation.
Typical cooler range
0°C to +8°C
Glass construction
Double-pane tempered Low-E IGU
Door matching
OEM dimensions or existing cabinet opening
Commercial terms
Confirmed after drawing and quantity review
Typical values describe common cooler projects. Final performance and configuration depend on cabinet setpoint, ambient humidity, door size, installation conditions, and the approved project drawing.
A cooler door should be specified as a complete interface with the cabinet, not only as a glass panel. These are the main details reviewed before sampling and production.
| Item | Typical cooler option | Confirm before quotation |
|---|---|---|
| Operating conditions | Commercial cooling from 0°C to +8°C | Cabinet setpoint, ambient temperature, humidity, and condensation risk |
| Insulated glass | Double-pane tempered Low-E IGU with argon fill | Glass size, thickness, coating surface, spacer, and optional heating |
| Frame | Aluminum alloy; frameless, stainless, titanium, and PVC options available by model | Profile drawing, finish, frame color, mounting interface, and wiring route |
| Hardware | Self-closing hinge, full-length or recessed handle | Hinge side, hold-open requirement, handle position, load, and opening direction |
| Gasket | Replaceable magnetic gasket | Gasket profile, compression, corner joint, and cabinet sealing surface |
| OEM dimensions | Custom door and frame assemblies | Rough opening, door leaf size, clearances, hole positions, drawings, photos, or sample |
Select a starting model, then confirm the final door build from the cabinet drawing, target temperature, hardware interface, and order plan.
RI-AL-01
The baseline reach-in glass door: a classic aluminum-alloy heated frame with heated tempered Low-E glass and argon fill, in a 2-pane cooler or 3-pane freezer build. A proven, widely used profile for upright display coolers and OEM cabinets, offered in classic black or silver frame finishes.
Review model details →
RI-AL-02
Square-corner version of the classic aluminum reach-in door, with the same heated tempered Low-E + argon glass (2-pane cooler / 3-pane freezer) and aluminum heated frame. The square-corner geometry suits cabinets and line-ups that want a crisp, modern rectilinear look.
Review model details →
RI-AL-03
Narrow-frame variant of the square-corner aluminum door: a slimmer aluminum profile that maximizes glass viewing area for stronger product display, while keeping the heated tempered Low-E + argon build. Offered with more external and recessed handle choices.
Review model details →
RI-FR-01
Frameless full-view door that removes the visible frame for an uninterrupted glass display face, with heated 2-pane (cooler) / 3-pane (freezer) Low-E glass, aluminum spacer and anti-fog / anti-condensation performance. A strong magnetic gasket and self-close keep insulation tight despite the minimal framing.
Review model details →
RI-SL-01
Sliding glass door system for cabinets where swing clearance is limited. It runs on a durable sliding track with a soft-close mechanism, heated glass and frame, and Low-E insulated glass for anti-condensation, energy-saving performance in an ultra-narrow frame.
Review model details →
RI-PVC-01
Impact-resistant PVC-profile frame door with double or triple tempered glass and anti-fog Low-E coating, using heavy-duty gravity hinges and automatic self-close. A cost-effective, durable profile that takes custom frame colors and textures and supports lockable security options.
Review model details →Share the opening size, target temperature, quantity, hardware preference, destination, and available drawings or photos.
Confirm glass construction, frame interface, hinge side, handle, gasket profile, clearances, and any heater or wiring requirement.
Sample scope and acceptance points are agreed before batch production. Existing cabinet parts or a reference sample can support matching work.
Door dimensions, glass and frame assembly, hinge operation, gasket fit, appearance, and packing details are checked against the approved project information.
Standard packing uses export cartons with pallet support. Edge protection, protective film, carton marks, pallet quantity, mixed-SKU loading, and any wooden-crate requirement are confirmed before shipment.
Production lead time is confirmed during RFQ review after the drawing, door configuration, sample status, quantity, packing method, and target shipment date are known. Sample, pilot, and batch orders may follow different schedules.
A typical commercial cooler project operates from 0°C to +8°C. Final glass construction, Low-E coating, heating requirement, gasket, and frame configuration are confirmed against the cabinet setpoint, ambient humidity, door size, and installation conditions.
Cooler doors are commonly specified with double-pane tempered insulated glass, a Low-E coating, and an argon-filled cavity. The final pane thickness, spacer, coating surface, and optional heating are confirmed from the project drawing and condensation-control requirement.
Yes. OEM projects are reviewed from the cabinet opening, door dimensions, frame interface, hinge side, handle, gasket profile, glass construction, and quantity. A drawing or physical sample helps confirm the matching details before sample approval and batch production.
Sample requirements are confirmed during technical review. Standard export packing uses cartons with pallet support, with edge protection, carton marks, pallet quantity, and crate requirements confirmed per order. Production lead time is confirmed after the drawing, configuration, quantity, and sample status are locked during RFQ review.
Please provide the door or rough-opening dimensions, target temperature, ambient conditions, glass configuration, frame color, hinge side, handle type, gasket requirement, heating requirement, voltage where applicable, quantity, destination, requested lead time, and any available drawing, photo, or sample.
Send the cabinet opening, door size, temperature, glass requirement, hinge side, handle, gasket, quantity, destination, and available drawing or sample information for technical review.